You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

646 lines
19 KiB

#
# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
override TARGET_BUILD=
include $(INCLUDE_DIR)/prereq.mk
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/version.mk
include $(INCLUDE_DIR)/image-commands.mk
ifndef IB
ifdef CONFIG_TARGET_PER_DEVICE_ROOTFS
TARGET_PER_DEVICE_ROOTFS := 1
endif
endif
include $(INCLUDE_DIR)/image-legacy.mk
include $(INCLUDE_DIR)/feeds.mk
include $(INCLUDE_DIR)/rootfs.mk
override MAKE:=$(_SINGLE)$(SUBMAKE)
override NO_TRACE_MAKE:=$(_SINGLE)$(NO_TRACE_MAKE)
target_params = $(subst +,$(space),$*)
param_get = $(patsubst $(1)=%,%,$(filter $(1)=%,$(2)))
param_get_default = $(firstword $(call param_get,$(1),$(2)) $(3))
param_mangle = $(subst $(space),_,$(strip $(1)))
param_unmangle = $(subst _,$(space),$(1))
mkfs_packages_id = $(shell echo $(sort $(1)) | mkhash md5 | head -c 8)
mkfs_target_dir = $(if $(call param_get,pkg,$(1)),$(KDIR)/target-dir-$(call param_get,pkg,$(1)),$(TARGET_DIR))
KDIR=$(KERNEL_BUILD_DIR)
KDIR_TMP=$(KDIR)/tmp
DTS_DIR:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts
IMG_PREFIX_EXTRA:=$(if $(EXTRA_IMAGE_NAME),$(call sanitize,$(EXTRA_IMAGE_NAME))-)
IMG_PREFIX_VERNUM:=$(if $(CONFIG_VERSION_FILENAMES),$(call sanitize,$(VERSION_NUMBER))-)
IMG_PREFIX_VERCODE:=$(if $(CONFIG_VERSION_CODE_FILENAMES),$(call sanitize,$(VERSION_CODE))-)
IMG_PREFIX:=$(VERSION_DIST_SANITIZED)-$(IMG_PREFIX_VERNUM)$(IMG_PREFIX_VERCODE)$(IMG_PREFIX_EXTRA)$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))
MKFS_DEVTABLE_OPT := -D $(INCLUDE_DIR)/device_table.txt
ifneq ($(CONFIG_BIG_ENDIAN),)
JFFS2OPTS := --big-endian --squash-uids -v
else
JFFS2OPTS := --little-endian --squash-uids -v
endif
ifeq ($(CONFIG_JFFS2_RTIME),y)
JFFS2OPTS += -X rtime
endif
ifeq ($(CONFIG_JFFS2_ZLIB),y)
JFFS2OPTS += -X zlib
endif
ifeq ($(CONFIG_JFFS2_LZMA),y)
JFFS2OPTS += -X lzma --compression-mode=size
endif
ifneq ($(CONFIG_JFFS2_RTIME),y)
JFFS2OPTS += -x rtime
endif
ifneq ($(CONFIG_JFFS2_ZLIB),y)
JFFS2OPTS += -x zlib
endif
ifneq ($(CONFIG_JFFS2_LZMA),y)
JFFS2OPTS += -x lzma
endif
JFFS2OPTS += $(MKFS_DEVTABLE_OPT)
SQUASHFS_BLOCKSIZE := $(CONFIG_TARGET_SQUASHFS_BLOCK_SIZE)k
SQUASHFSOPT := -b $(SQUASHFS_BLOCKSIZE)
SQUASHFSOPT += -p '/dev d 755 0 0' -p '/dev/console c 600 0 0 5 1'
SQUASHFSCOMP := gzip
LZMA_XZ_OPTIONS := -Xpreset 9 -Xe -Xlc 0 -Xlp 2 -Xpb 2
ifeq ($(CONFIG_SQUASHFS_XZ),y)
ifneq ($(filter arm x86 powerpc sparc,$(LINUX_KARCH)),)
BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
endif
SQUASHFSCOMP := xz $(LZMA_XZ_OPTIONS) $(BCJ_FILTER)
endif
JFFS2_BLOCKSIZE ?= 64k 128k
fs-types-$(CONFIG_TARGET_ROOTFS_SQUASHFS) += squashfs
fs-types-$(CONFIG_TARGET_ROOTFS_JFFS2) += $(addprefix jffs2-,$(JFFS2_BLOCKSIZE))
fs-types-$(CONFIG_TARGET_ROOTFS_JFFS2_NAND) += $(addprefix jffs2-nand-,$(NAND_BLOCKSIZE))
fs-types-$(CONFIG_TARGET_ROOTFS_EXT4FS) += ext4
fs-types-$(CONFIG_TARGET_ROOTFS_ISO) += iso
fs-types-$(CONFIG_TARGET_ROOTFS_UBIFS) += ubifs
fs-subtypes-$(CONFIG_TARGET_ROOTFS_JFFS2) += $(addsuffix -raw,$(addprefix jffs2-,$(JFFS2_BLOCKSIZE)))
TARGET_FILESYSTEMS := $(fs-types-y)
FS_64K := $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-64k
FS_128K := $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-128k
FS_256K := $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-256k
define add_jffs2_mark
echo -ne '\xde\xad\xc0\xde' >> $(1)
endef
PROFILE_SANITIZED := $(call sanitize,$(PROFILE))
define split_args
$(foreach data, \
$(subst |,$(space),\
$(subst $(space),^,$(1))), \
$(call $(2),$(strip $(subst ^,$(space),$(data)))))
endef
define build_cmd
$(if $(Build/$(word 1,$(1))),,$(error Missing Build/$(word 1,$(1))))
$(call Build/$(word 1,$(1)),$(wordlist 2,$(words $(1)),$(1)))
endef
define concat_cmd
$(call split_args,$(1),build_cmd)
endef
# pad to 4k, 8k, 16k, 64k, 128k, 256k and add jffs2 end-of-filesystem mark
define prepare_generic_squashfs
$(STAGING_DIR_HOST)/bin/padjffs2 $(1) 4 8 16 64 128 256
endef
define Image/BuildKernel/Initramfs
$(call Image/Build/Initramfs)
endef
define Image/BuildKernel/MkuImage
mkimage -A $(ARCH) -O linux -T kernel -C $(1) -a $(2) -e $(3) \
-n '$(call toupper,$(ARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' -d $(4) $(5)
endef
define Image/BuildKernel/MkFIT
$(TOPDIR)/scripts/mkits.sh \
-D $(1) -o $(KDIR)/fit-$(1).its -k $(2) $(if $(3),-d $(3)) -C $(4) -a $(5) -e $(6) \
-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config@1") \
-A $(LINUX_KARCH) -v $(LINUX_VERSION)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $(KDIR)/fit-$(1).its $(KDIR)/fit-$(1)$(7).itb
endef
ifdef CONFIG_TARGET_IMAGES_GZIP
define Image/Gzip
rm -f $(1).gz
gzip -9n $(1)
endef
endif
build: dtc: Disable noisy warnings by default While helping with review and build testing of a few 4.19 pull requests, I've noticed, that dtc compiler in OpenWrt uses different options then upstream kernel, which is leading to a very noisy output[1]. It wouldn't be that bad per se, but a lot of such warnings aren't easily fixable so I think, that we should follow what upstream does and simply ignore^W silence those noisy warnings. So this patch tries to syncs dtc compiler flags with upstream kernel till version 4.19.13, disabling those warnings as they were added in upstream kernel: v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default The newly added dtc warning to check DT unit-address without reg property and vice-versa generates lots of warnings. Turn off the check unless building with W=1 or W=2. v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Build tested on imx6 and ath79 with 4.14 and 4.19. 1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335 Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
# Disable noisy checks by default as in upstream
ifeq ($(strip $(call kernel_patchver_ge,4.7.0)),1)
build: dtc: Disable noisy warnings by default While helping with review and build testing of a few 4.19 pull requests, I've noticed, that dtc compiler in OpenWrt uses different options then upstream kernel, which is leading to a very noisy output[1]. It wouldn't be that bad per se, but a lot of such warnings aren't easily fixable so I think, that we should follow what upstream does and simply ignore^W silence those noisy warnings. So this patch tries to syncs dtc compiler flags with upstream kernel till version 4.19.13, disabling those warnings as they were added in upstream kernel: v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default The newly added dtc warning to check DT unit-address without reg property and vice-versa generates lots of warnings. Turn off the check unless building with W=1 or W=2. v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Build tested on imx6 and ath79 with 4.14 and 4.19. 1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335 Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
DTC_FLAGS += -Wno-unit_address_vs_reg
endif
ifeq ($(strip $(call kernel_patchver_ge,4.12.0)),1)
build: dtc: Disable noisy warnings by default While helping with review and build testing of a few 4.19 pull requests, I've noticed, that dtc compiler in OpenWrt uses different options then upstream kernel, which is leading to a very noisy output[1]. It wouldn't be that bad per se, but a lot of such warnings aren't easily fixable so I think, that we should follow what upstream does and simply ignore^W silence those noisy warnings. So this patch tries to syncs dtc compiler flags with upstream kernel till version 4.19.13, disabling those warnings as they were added in upstream kernel: v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default The newly added dtc warning to check DT unit-address without reg property and vice-versa generates lots of warnings. Turn off the check unless building with W=1 or W=2. v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Build tested on imx6 and ath79 with 4.14 and 4.19. 1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335 Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
DTC_FLAGS += \
-Wno-unit_address_vs_reg \
-Wno-simple_bus_reg \
-Wno-unit_address_format \
-Wno-pci_bridge \
-Wno-pci_device_bus_num \
-Wno-pci_device_reg
endif
ifeq ($(strip $(call kernel_patchver_ge,4.17.0)),1)
build: dtc: Disable noisy warnings by default While helping with review and build testing of a few 4.19 pull requests, I've noticed, that dtc compiler in OpenWrt uses different options then upstream kernel, which is leading to a very noisy output[1]. It wouldn't be that bad per se, but a lot of such warnings aren't easily fixable so I think, that we should follow what upstream does and simply ignore^W silence those noisy warnings. So this patch tries to syncs dtc compiler flags with upstream kernel till version 4.19.13, disabling those warnings as they were added in upstream kernel: v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default The newly added dtc warning to check DT unit-address without reg property and vice-versa generates lots of warnings. Turn off the check unless building with W=1 or W=2. v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Build tested on imx6 and ath79 with 4.14 and 4.19. 1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335 Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
DTC_FLAGS += \
-Wno-avoid_unnecessary_addr_size \
-Wno-alias_paths
endif
ifeq ($(strip $(call kernel_patchver_ge,4.18.0)),1)
build: dtc: Disable noisy warnings by default While helping with review and build testing of a few 4.19 pull requests, I've noticed, that dtc compiler in OpenWrt uses different options then upstream kernel, which is leading to a very noisy output[1]. It wouldn't be that bad per se, but a lot of such warnings aren't easily fixable so I think, that we should follow what upstream does and simply ignore^W silence those noisy warnings. So this patch tries to syncs dtc compiler flags with upstream kernel till version 4.19.13, disabling those warnings as they were added in upstream kernel: v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default The newly added dtc warning to check DT unit-address without reg property and vice-versa generates lots of warnings. Turn off the check unless building with W=1 or W=2. v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Build tested on imx6 and ath79 with 4.14 and 4.19. 1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335 Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
DTC_FLAGS += \
-Wno-graph_child_address \
-Wno-graph_port \
-Wno-unique_unit_address
endif
# $(1) source dts file
# $(2) target dtb file
# $(3) extra CPP flags
# $(4) extra DTC flags
define Image/BuildDTB
$(TARGET_CROSS)cpp -nostdinc -x assembler-with-cpp \
-I$(DTS_DIR) \
-I$(DTS_DIR)/include \
-I$(LINUX_DIR)/include/ \
-undef -D__DTS__ $(3) \
-o $(2).tmp $(1)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb \
build: dtc: Disable noisy warnings by default While helping with review and build testing of a few 4.19 pull requests, I've noticed, that dtc compiler in OpenWrt uses different options then upstream kernel, which is leading to a very noisy output[1]. It wouldn't be that bad per se, but a lot of such warnings aren't easily fixable so I think, that we should follow what upstream does and simply ignore^W silence those noisy warnings. So this patch tries to syncs dtc compiler flags with upstream kernel till version 4.19.13, disabling those warnings as they were added in upstream kernel: v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default The newly added dtc warning to check DT unit-address without reg property and vice-versa generates lots of warnings. Turn off the check unless building with W=1 or W=2. v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Build tested on imx6 and ath79 with 4.14 and 4.19. 1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335 Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
-i$(dir $(1)) $(DTC_FLAGS) $(4) \
-o $(2) $(2).tmp
$(RM) $(2).tmp
endef
define Image/mkfs/jffs2/sub-raw
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
$(2) \
-e $(patsubst %k,%KiB,$(1)) \
-o $@ -d $(call mkfs_target_dir,$(3)) \
-v 2>&1 1>/dev/null | awk '/^.+$$$$/'
endef
define Image/mkfs/jffs2/sub
$(call Image/mkfs/jffs2/sub-raw,$(1),--pad $(2),$(3))
$(call add_jffs2_mark,$@)
endef
define Image/mkfs/jffs2/template
Image/mkfs/jffs2-$(1) = $$(call Image/mkfs/jffs2/sub,$(1),$(JFFS2OPTS),$$(1))
Image/mkfs/jffs2-$(1)-raw = $$(call Image/mkfs/jffs2/sub-raw,$(1),$(JFFS2OPTS),$$(1))
endef
define Image/mkfs/jffs2-nand/template
Image/mkfs/jffs2-nand-$(1) = \
$$(call Image/mkfs/jffs2/sub, \
$(word 2,$(subst -, ,$(1))), \
$(JFFS2OPTS) --no-cleanmarkers --pagesize=$(word 1,$(subst -, ,$(1))),$$(1))
endef
$(eval $(foreach S,$(JFFS2_BLOCKSIZE),$(call Image/mkfs/jffs2/template,$(S))))
$(eval $(foreach S,$(NAND_BLOCKSIZE),$(call Image/mkfs/jffs2-nand/template,$(S))))
define Image/mkfs/squashfs
$(STAGING_DIR_HOST)/bin/mksquashfs4 $(call mkfs_target_dir,$(1)) $@ \
-nopad -noappend -root-owned \
-comp $(SQUASHFSCOMP) $(SQUASHFSOPT) \
-processors 1
endef
# $(1): board name
# $(2): rootfs type
# $(3): kernel image
# $(4): compat string
ifneq ($(CONFIG_NAND_SUPPORT),)
define Image/Build/SysupgradeNAND
mkdir -p "$(KDIR_TMP)/sysupgrade-$(if $(4),$(4),$(1))/"
echo "BOARD=$(if $(4),$(4),$(1))" > "$(KDIR_TMP)/sysupgrade-$(if $(4),$(4),$(1))/CONTROL"
[ -z "$(2)" ] || $(CP) "$(KDIR)/root.$(2)" "$(KDIR_TMP)/sysupgrade-$(if $(4),$(4),$(1))/root"
[ -z "$(3)" ] || $(CP) "$(3)" "$(KDIR_TMP)/sysupgrade-$(if $(4),$(4),$(1))/kernel"
(cd "$(KDIR_TMP)"; $(TAR) cvf \
"$(BIN_DIR)/$(IMG_PREFIX)-$(1)-$(2)-sysupgrade.tar" sysupgrade-$(if $(4),$(4),$(1)) \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
)
endef
# $(1) board name
# $(2) ubinize-image options (e.g. --uboot-env and/or --kernel kernelimage)
# $(3) rootfstype (e.g. squashfs or ubifs)
# $(4) options to pass-through to ubinize (i.e. $($(PROFILE)_UBI_OPTS)))
define Image/Build/UbinizeImage
sh $(TOPDIR)/scripts/ubinize-image.sh $(2) \
"$(KDIR)/root.$(3)" \
"$(KDIR)/$(IMG_PREFIX)-$(1)-$(3)-ubinized.bin" \
$(4)
endef
endif
define Image/mkfs/ubifs
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
$(UBIFS_OPTS) $(call param_unmangle,$(call param_get,fs,$(1))) \
$(if $(CONFIG_TARGET_UBIFS_FREE_SPACE_FIXUP),--space-fixup) \
$(if $(CONFIG_TARGET_UBIFS_COMPRESSION_NONE),--compr=none) \
$(if $(CONFIG_TARGET_UBIFS_COMPRESSION_LZO),--compr=lzo) \
$(if $(CONFIG_TARGET_UBIFS_COMPRESSION_ZLIB),--compr=zlib) \
$(if $(shell echo $(CONFIG_TARGET_UBIFS_JOURNAL_SIZE)),--jrn-size=$(CONFIG_TARGET_UBIFS_JOURNAL_SIZE)) \
--squash-uids \
-o $@ -d $(call mkfs_target_dir,$(1))
endef
E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024*1024)))
define Image/mkfs/ext4
$(STAGING_DIR_HOST)/bin/make_ext4fs \
-l $(E2SIZE) -b $(CONFIG_TARGET_EXT4_BLOCKSIZE) \
$(if $(CONFIG_TARGET_EXT4_RESERVED_PCT),-m $(CONFIG_TARGET_EXT4_RESERVED_PCT)) \
$(if $(CONFIG_TARGET_EXT4_JOURNAL),,-J) \
$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
$@ $(call mkfs_target_dir,$(1))/
endef
define Image/Manifest
$(call opkg,$(TARGET_DIR_ORIG)) list-installed > \
$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest
endef
ifdef CONFIG_TARGET_ROOTFS_TARGZ
define Image/Build/targz
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-C $(TARGET_DIR)/ . | gzip -9n > $(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED))-rootfs.tar.gz
endef
endif
ifdef CONFIG_TARGET_ROOTFS_CPIOGZ
define Image/Build/cpiogz
( cd $(TARGET_DIR); find . | cpio -o -H newc -R root:root | gzip -9n >$(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz )
endef
endif
mkfs_packages = $(filter-out @%,$(PACKAGES_$(call param_get,pkg,pkg=$(target_params))))
mkfs_packages_add = $(foreach pkg,$(filter-out -%,$(mkfs_packages)),$(pkg)$(call GetABISuffix,$(pkg)))
mkfs_packages_remove = $(foreach pkg,$(patsubst -%,%,$(filter -%,$(mkfs_packages))),$(pkg)$(call GetABISuffix,$(pkg)))
mkfs_cur_target_dir = $(call mkfs_target_dir,pkg=$(target_params))
opkg_target = \
$(call opkg,$(mkfs_cur_target_dir)) \
-f $(mkfs_cur_target_dir).conf
target-dir-%: FORCE
rm -rf $(mkfs_cur_target_dir) $(mkfs_cur_target_dir).opkg
$(CP) $(TARGET_DIR_ORIG) $(mkfs_cur_target_dir)
-mv $(mkfs_cur_target_dir)/etc/opkg $(mkfs_cur_target_dir).opkg
echo 'src default file://$(PACKAGE_DIR_ALL)' > $(mkfs_cur_target_dir).conf
$(if $(mkfs_packages_remove), \
-$(call opkg,$(mkfs_cur_target_dir)) remove \
$(mkfs_packages_remove))
$(if $(call opkg_package_files,$(mkfs_packages_add)), \
$(opkg_target) update && \
$(opkg_target) install \
$(call opkg_package_files,$(mkfs_packages_add)))
-$(CP) -T $(mkfs_cur_target_dir).opkg/ $(mkfs_cur_target_dir)/etc/opkg/
rm -rf $(mkfs_cur_target_dir).opkg $(mkfs_cur_target_dir).conf
$(call prepare_rootfs,$(mkfs_cur_target_dir),$(TOPDIR)/files)
$(KDIR)/root.%: kernel_prepare
$(call Image/mkfs/$(word 1,$(target_params)),$(target_params))
define Device/InitProfile
PROFILES := $(PROFILE)
DEVICE_TITLE :=
DEVICE_PACKAGES :=
DEVICE_DESCRIPTION = Build firmware images for $$(DEVICE_TITLE)
endef
define Device/Init
DEVICE_NAME := $(1)
KERNEL:=
KERNEL_INITRAMFS = $$(KERNEL)
KERNEL_SIZE:=
CMDLINE:=
IMAGES :=
ARTIFACTS :=
IMAGE_PREFIX := $(IMG_PREFIX)-$(1)
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1)-$$(2)
KERNEL_PREFIX = $$(IMAGE_PREFIX)
KERNEL_SUFFIX := -kernel.bin
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX)
KERNEL_IMAGE = $$(KERNEL_PREFIX)$$(KERNEL_SUFFIX)
KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-initramfs
KERNEL_INITRAMFS_IMAGE = $$(KERNEL_INITRAMFS_PREFIX)$$(KERNEL_INITRAMFS_SUFFIX)
KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs
KERNEL_INSTALL :=
KERNEL_NAME := vmlinux
KERNEL_DEPENDS :=
KERNEL_SIZE :=
UBOOTENV_IN_UBI :=
KERNEL_IN_UBI :=
BLOCKSIZE :=
PAGESIZE :=
SUBPAGESIZE :=
VID_HDR_OFFSET :=
UBINIZE_OPTS :=
UBINIZE_PARTS :=
MKUBIFS_OPTS :=
FS_OPTIONS/ubifs = $$(MKUBIFS_OPTS)
DEVICE_DTS :=
DEVICE_DTS_CONFIG :=
DEVICE_DTS_DIR :=
BOARD_NAME :=
UIMAGE_NAME :=
SUPPORTED_DEVICES :=
IMAGE_METADATA :=
FILESYSTEMS := $(TARGET_FILESYSTEMS)
UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-$(1)
DEFAULT :=
endef
DEFAULT_DEVICE_VARS := \
DEVICE_NAME KERNEL KERNEL_INITRAMFS KERNEL_INITRAMFS_IMAGE KERNEL_SIZE \
CMDLINE UBOOTENV_IN_UBI KERNEL_IN_UBI BLOCKSIZE PAGESIZE SUBPAGESIZE \
VID_HDR_OFFSET UBINIZE_OPTS UBINIZE_PARTS MKUBIFS_OPTS DEVICE_DTS \
DEVICE_DTS_CONFIG DEVICE_DTS_DIR BOARD_NAME UIMAGE_NAME SUPPORTED_DEVICES \
IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR UBOOT_PATH
define Device/ExportVar
$(1) : $(2):=$$($(2))
endef
define Device/Export
$(foreach var,$(DEVICE_VARS) $(DEFAULT_DEVICE_VARS),$(call Device/ExportVar,$(1),$(var)))
$(1) : FILESYSTEM:=$(2)
endef
ifdef IB
DEVICE_CHECK_PROFILE = $(filter $(1),DEVICE_$(PROFILE) $(PROFILE))
else
DEVICE_CHECK_PROFILE = $(CONFIG_TARGET_$(if $(CONFIG_TARGET_MULTI_PROFILE),DEVICE_)$(call target_conf,$(BOARD)$(if $(SUBTARGET),_$(SUBTARGET)))_$(1))
endif
DEVICE_EXTRA_PACKAGES = $(call qstrip,$(CONFIG_TARGET_DEVICE_PACKAGES_$(call target_conf,$(BOARD)$(if $(SUBTARGET),_$(SUBTARGET)))_DEVICE_$(1)))
define merge_packages
$(1) :=
$(foreach pkg,$(2),
$(1) := $$(strip $$(filter-out -$$(patsubst -%,%,$(pkg)) $$(patsubst -%,%,$(pkg)),$$($(1))) $(pkg))
)
endef
define Device/Check/Common
_PROFILE_SET = $$(strip $$(foreach profile,$$(PROFILES) DEVICE_$(1),$$(call DEVICE_CHECK_PROFILE,$$(profile))))
DEVICE_PACKAGES += $$(call extra_packages,$$(DEVICE_PACKAGES))
ifdef TARGET_PER_DEVICE_ROOTFS
$$(eval $$(call merge_packages,_PACKAGES,$$(DEVICE_PACKAGES) $$(call DEVICE_EXTRA_PACKAGES,$(1))))
ROOTFS_ID/$(1) := $$(if $$(_PROFILE_SET),$$(call mkfs_packages_id,$$(_PACKAGES)))
PACKAGES_$$(ROOTFS_ID/$(1)) := $$(_PACKAGES)
endif
endef
define Device/Check
$(Device/Check/Common)
KDIR_KERNEL_IMAGE := $(KDIR)/$(1)$$(KERNEL_SUFFIX)
_TARGET := $$(if $$(_PROFILE_SET),install-images,install-disabled)
ifndef IB
_COMPILE_TARGET := $$(if $(CONFIG_IB)$$(_PROFILE_SET),compile,compile-disabled)
endif
endef
ifndef IB
define Device/Build/initramfs
$(call Device/Export,$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE),$(1))
$$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
$(KDIR)/$$(KERNEL_INITRAMFS_NAME):: image_prepare
$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
cp $$^ $$@
$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
@rm -f $$@
$$(call concat_cmd,$$(KERNEL_INITRAMFS))
endef
endif
define Device/Build/compile
$$(_COMPILE_TARGET): $(KDIR)/$(1)
$(eval $(call Device/Export,$(KDIR)/$(1)))
$(KDIR)/$(1):
$$(call concat_cmd,$(COMPILE/$(1)))
endef
ifndef IB
define Device/Build/dtb
ifndef BUILD_DTS_$(1)
BUILD_DTS_$(1) := 1
$(KDIR)/image-$(1).dtb: FORCE
$(call Image/BuildDTB,$(strip $(2))/$(strip $(3)).dts,$$@)
image_prepare: $(KDIR)/image-$(1).dtb
endif
endef
endif
define Device/Build/kernel
$$(eval $$(foreach dts,$$(DEVICE_DTS), \
$$(call Device/Build/dtb,$$(notdir $$(dts)), \
$$(if $$(DEVICE_DTS_DIR),$$(DEVICE_DTS_DIR),$$(DTS_DIR)), \
$$(dts) \
) \
))
$(KDIR)/$$(KERNEL_NAME):: image_prepare
$$(_TARGET): $$(if $$(KERNEL_INSTALL),$(BIN_DIR)/$$(KERNEL_IMAGE))
$(call Device/Export,$$(KDIR_KERNEL_IMAGE),$(1))
$(BIN_DIR)/$$(KERNEL_IMAGE): $$(KDIR_KERNEL_IMAGE)
cp $$^ $$@
ifndef IB
ifdef CONFIG_IB
install: $$(KDIR_KERNEL_IMAGE)
endif
$$(KDIR_KERNEL_IMAGE): $(KDIR)/$$(KERNEL_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
@rm -f $$@
$$(call concat_cmd,$$(KERNEL))
$$(if $$(KERNEL_SIZE),$$(call Build/check-size,$$(KERNEL_SIZE)))
endif
endef
define Device/Build/image
GZ_SUFFIX := $(if $(filter %dtb %gz,$(2)),,$(if $(and $(findstring ext4,$(1)),$(CONFIG_TARGET_IMAGES_GZIP)),.gz))
$$(_TARGET): $(BIN_DIR)/$(call IMAGE_NAME,$(1),$(2))$$(GZ_SUFFIX)
$(eval $(call Device/Export,$(KDIR)/tmp/$(call IMAGE_NAME,$(1),$(2)),$(1)))
ROOTFS/$(1)/$(3) := \
$(KDIR)/root.$(1)$$(strip \
$$(if $$(FS_OPTIONS/$(1)),+fs=$$(call param_mangle,$$(FS_OPTIONS/$(1)))) \
)$$(strip \
$(if $(TARGET_PER_DEVICE_ROOTFS),+pkg=$$(ROOTFS_ID/$(3))) \
)
ifndef IB
$$(ROOTFS/$(1)/$(3)): $(if $(TARGET_PER_DEVICE_ROOTFS),target-dir-$$(ROOTFS_ID/$(3)))
endif
$(KDIR)/tmp/$(call IMAGE_NAME,$(1),$(2)): $$(KDIR_KERNEL_IMAGE) $$(ROOTFS/$(1)/$(3))
@rm -f $$@
[ -f $$(word 1,$$^) -a -f $$(word 2,$$^) ]
$$(call concat_cmd,$(if $(IMAGE/$(2)/$(1)),$(IMAGE/$(2)/$(1)),$(IMAGE/$(2))))
.IGNORE: $(BIN_DIR)/$(call IMAGE_NAME,$(1),$(2))
$(BIN_DIR)/$(call IMAGE_NAME,$(1),$(2)).gz: $(KDIR)/tmp/$(call IMAGE_NAME,$(1),$(2))
gzip -c -9n $$^ > $$@
$(BIN_DIR)/$(call IMAGE_NAME,$(1),$(2)): $(KDIR)/tmp/$(call IMAGE_NAME,$(1),$(2))
cp $$^ $$@
endef
define Device/Build/artifact
$$(_TARGET): $(BIN_DIR)/$(IMAGE_PREFIX)-$(1)
$(eval $(call Device/Export,$(KDIR)/tmp/$(IMAGE_PREFIX)-$(1)))
$(KDIR)/tmp/$(IMAGE_PREFIX)-$(1): $$(KDIR_KERNEL_IMAGE)
@rm -f $$@
$$(call concat_cmd,$(ARTIFACT/$(1)))
.IGNORE: $(BIN_DIR)/$(IMAGE_PREFIX)-$(1)
$(BIN_DIR)/$(IMAGE_PREFIX)-$(1): $(KDIR)/tmp/$(IMAGE_PREFIX)-$(1)
cp $$^ $$@
endef
define Device/Build
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Device/Build/initramfs,$(1)))
$(call Device/Build/kernel,$(1))
$$(eval $$(foreach compile,$$(COMPILE), \
$$(call Device/Build/compile,$$(compile),$(1))))
$$(eval $$(foreach image,$$(IMAGES), \
$$(foreach fs,$$(filter $(TARGET_FILESYSTEMS),$$(FILESYSTEMS)), \
$$(call Device/Build/image,$$(fs),$$(image),$(1)))))
$$(eval $$(foreach artifact,$$(ARTIFACTS), \
$$(call Device/Build/artifact,$$(artifact))))
endef
define Device/DumpInfo
Target-Profile: DEVICE_$(1)
Target-Profile-Name: $(DEVICE_TITLE)
Target-Profile-Packages: $(DEVICE_PACKAGES)
Target-Profile-hasImageMetadata: $(if $(foreach image,$(IMAGES),$(findstring append-metadata,$(IMAGE/$(image)))),1,0)
Target-Profile-SupportedDevices: $(SUPPORTED_DEVICES)
$(if $(DEFAULT),Target-Profile-Default: $(DEFAULT))
Target-Profile-Description:
$(DEVICE_DESCRIPTION)
@@
endef
define Device/Dump
$$(eval $$(if $$(DEVICE_TITLE),$$(info $$(call Device/DumpInfo,$(1)))))
endef
define Device
$(call Device/InitProfile,$(1))
$(call Device/Init,$(1))
$(call Device/Default,$(1))
$(call Device/$(1),$(1))
$(call Device/Check,$(1))
$(call Device/$(if $(DUMP),Dump,Build),$(1))
endef
define BuildImage
ifneq ($(DUMP),)
all: dumpinfo
dumpinfo: FORCE
@true
endif
download:
prepare:
compile:
clean:
legacy-images-prepare:
legacy-images:
image_prepare:
ifeq ($(IB),)
.PHONY: download prepare compile clean image_prepare kernel_prepare install install-images
compile:
$(call Build/Compile)
clean:
$(call Build/Clean)
image_prepare: compile
mkdir -p $(BIN_DIR) $(KDIR)/tmp
$(call Image/Prepare)
legacy-images-prepare-make: image_prepare
$(MAKE) legacy-images-prepare BIN_DIR="$(BIN_DIR)"
else
image_prepare:
mkdir -p $(BIN_DIR) $(KDIR)/tmp
endif
kernel_prepare: image_prepare
$(call Image/Build/targz)
$(call Image/Build/cpiogz)
$(call Image/BuildKernel)
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(if $(IB),,$(call Image/BuildKernel/Initramfs)))
$(call Image/InstallKernel)
$(foreach device,$(TARGET_DEVICES),$(call Device,$(device)))
$(foreach device,$(LEGACY_DEVICES),$(call LegacyDevice,$(device)))
install-images: kernel_prepare $(foreach fs,$(filter-out $(if $(UBIFS_OPTS),,ubifs),$(TARGET_FILESYSTEMS) $(fs-subtypes-y)),$(KDIR)/root.$(fs))
$(foreach fs,$(TARGET_FILESYSTEMS),
$(call Image/Build,$(fs))
)
legacy-images-make: install-images
$(call Image/mkfs/ubifs/legacy)
$(MAKE) legacy-images BIN_DIR="$(BIN_DIR)"
install: install-images
$(call Image/Manifest)
endef