You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

191 lines
4.3 KiB

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
+ imx6q-gw5400-a.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -98,6 +98,14 @@
MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
>;
};
+
+ pinctrl_audmux_3: audmux-3 {
+ fsl,pins = <
+ MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
+ MX6Q_PAD_EIM_D25__AUD5_RXC 0x80000000
+ MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
+ >;
+ };
};
ecspi1 {
@@ -205,6 +213,12 @@
MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
};
i2c3 {
@@ -214,6 +228,12 @@
MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
};
uart1 {
@@ -223,6 +243,12 @@
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
};
uart2 {
@@ -232,6 +258,21 @@
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart2_2: uart2grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+ >;
+ };
};
uart4 {
@@ -242,6 +283,15 @@
>;
};
};
+
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+ };
usbotg {
pinctrl_usbotg_1: usbotggrp-1 {
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -25,6 +25,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/opp.h>
+#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
@@ -145,6 +146,65 @@ static void __init imx6q_sabrelite_init(
imx6q_sabrelite_cko1_setup();
}
+/*
+ * fixup for PEX 8909 bridge to configure GPIO1-7 as output High
+ * as they are used for slots1-7 PERST#
+ */
+static void mx6_ventana_pciesw_early_fixup(struct pci_dev *dev)
+{
+ u32 dw;
+
+ if (!of_machine_is_compatible("gw,ventana"))
+ return;
+
+ if (dev->devfn != 0)
+ return;
+
+ pci_read_config_dword(dev, 0x62c, &dw);
+ dw |= 0xaaa8; // GPIO1-7 outputs
+ pci_write_config_dword(dev, 0x62c, dw);
+
+ pci_read_config_dword(dev, 0x644, &dw);
+ dw |= 0xfe; // GPIO1-7 output high
+ pci_write_config_dword(dev, 0x644, dw);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609,
+ mx6_ventana_pciesw_early_fixup);
+
+/*
+ * configure PCIe core clock and PCIe ref clock
+ *
+ * TODO: disable CLK1 output and use CLK2 input from si52147 as PCIe ref
+ */
+static void __init imx6q_ventana_pcie_setup(void)
+{
+ struct clk *axi_sel, *axi, *ref;
+
+ axi_sel = clk_get_sys(NULL, "pcie_axi_sel");
+ axi = clk_get_sys(NULL, "axi");
+ ref = clk_get_sys(NULL, "pcie_ref_125m");
+ if (IS_ERR(axi_sel) || IS_ERR(axi) || IS_ERR(ref)) {
+ pr_err("pcie setup failed - can't get clocks\n");
+ goto put_clk;
+ }
+ clk_set_parent(axi_sel, axi);
+ clk_prepare_enable(ref);
+
+put_clk:
+ if (!IS_ERR(axi_sel))
+ clk_put(axi_sel);
+ if (!IS_ERR(axi))
+ clk_put(axi);
+ if (!IS_ERR(ref))
+ clk_put(ref);
+}
+
+static void __init imx6q_ventana_init(void)
+{
+ imx6q_ventana_pcie_setup();
+ imx6q_sabrelite_cko1_setup();
+}
+
static void __init imx6q_1588_init(void)
{
struct regmap *gpr;
@@ -163,6 +223,9 @@ static void __init imx6q_usb_init(void)
static void __init imx6q_init_machine(void)
{
+ if (of_machine_is_compatible("gw,ventana"))
+ imx6q_ventana_init();
+
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
imx6q_sabrelite_init();