You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch...

122 lines
3.1 KiB

brcm47xx: add support for the kernel 4.19 One patch that wasn't ported due to a lot of conflict is: 901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch Hopefully a correct/real fix will get developed before we switch brcm47xx to the 4.14. This IS NOT ready for switching/trying/using 4.19 yet due to some DMA regression affecting bgmac: [ 0.945472] bgmac_bcma bcma0:2: Found PHY addr: 25 [ 0.954565] libphy: bcma_mdio mii bus: probed [ 0.959486] ------------[ cut here ]------------ [ 0.964387] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 bgmac_enet_probe+0x1b4/0x5c4 [ 0.973751] Modules linked in: [ 0.976913] CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.9 #0 [ 0.982750] Stack : 804a0000 804597c4 00000000 00000000 80458fd8 8381bc2c 838282d4 80481a47 [ 0.991367] 8042e3ec 00000001 804d38f0 00000204 83980000 00000065 8381bbe0 6f55b24f [ 0.999975] 00000000 00000000 80520000 00002018 00000000 00000075 00000007 00000000 [ 1.008583] 00000000 80480000 000ee811 00000000 00000000 00000000 80432c00 80248db8 [ 1.017196] 00000009 00000204 83980000 803ad7b0 00000000 801feeec 00000000 804d0000 [ 1.025804] ... [ 1.028325] Call Trace: [ 1.030875] [<8000aef8>] show_stack+0x58/0x100 [ 1.035513] [<8001f8b4>] __warn+0xe4/0x118 [ 1.039708] [<8001f9a4>] warn_slowpath_null+0x48/0x64 [ 1.044935] [<80248db8>] bgmac_enet_probe+0x1b4/0x5c4 [ 1.050101] [<802498e0>] bgmac_probe+0x558/0x590 [ 1.054906] [<80252fd0>] bcma_device_probe+0x38/0x70 [ 1.060017] [<8020e1e8>] really_probe+0x170/0x2e8 [ 1.064891] [<8020e714>] __driver_attach+0xa4/0xec [ 1.069784] [<8020c1e0>] bus_for_each_dev+0x58/0xb0 [ 1.074833] [<8020d590>] bus_add_driver+0xf8/0x218 [ 1.079731] [<8020ef24>] driver_register+0xcc/0x11c [ 1.084804] [<804b54cc>] bgmac_init+0x1c/0x44 [ 1.089258] [<8000121c>] do_one_initcall+0x7c/0x1a0 [ 1.094343] [<804a1d34>] kernel_init_freeable+0x150/0x218 [ 1.099886] [<803a082c>] kernel_init+0x10/0x104 [ 1.104583] [<80005878>] ret_from_kernel_thread+0x14/0x1c [ 1.110107] ---[ end trace f441c0d873d1fb5b ]--- [ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed [ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA [ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12 [ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 years ago
From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Nov 2013 17:03:59 +0100
Subject: [PATCH 210/210] b44: register adm switch
---
drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
drivers/net/ethernet/broadcom/b44.h | 3 ++
2 files changed, 60 insertions(+)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -31,6 +31,8 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/adm6996-gpio.h>
#include <linux/uaccess.h>
#include <asm/io.h>
@@ -2246,6 +2248,69 @@ static void b44_adjust_link(struct net_d
}
}
+#ifdef CONFIG_BCM47XX
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ int gpio;
+ struct platform_device *pdev;
+ struct adm6996_gpio_platform_data adm_data = {0};
+ struct platform_device_info info = {0};
+
+ adm_data.model = ADM6996L;
+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
+ if (gpio >= 0)
+ adm_data.eecs = gpio;
+ else
+ adm_data.eecs = 2;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
+ if (gpio >= 0)
+ adm_data.eesk = gpio;
+ else
+ adm_data.eesk = 3;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
+ if (gpio >= 0)
+ adm_data.eedi = gpio;
+ else
+ adm_data.eedi = 4;
+
+ /*
+ * We ignore the "adm_rc" GPIO here. The driver does not use it,
+ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
+ */
+
+ info.parent = bp->sdev->dev;
+ info.name = "adm6996_gpio";
+ info.id = -1;
+ info.data = &adm_data;
+ info.size_data = sizeof(adm_data);
+
+ if (!bp->adm_switch) {
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ bp->adm_switch = pdev;
+ }
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+ if (bp->adm_switch)
+ platform_device_unregister(bp->adm_switch);
+}
+#else
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+
+}
+#endif /* CONFIG_BCM47XX */
+
static int b44_register_phy_one(struct b44 *bp)
{
struct mii_bus *mii_bus;
@@ -2281,6 +2346,9 @@ static int b44_register_phy_one(struct b
if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
(sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
+ b44_register_adm_switch(bp);
+
dev_info(sdev->dev,
"could not find PHY at %i, use fixed one\n",
bp->phy_addr);
@@ -2475,6 +2543,7 @@ static void b44_remove_one(struct ssb_de
unregister_netdev(dev);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
b44_unregister_phy_one(bp);
+ b44_unregister_adm_switch(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
netif_napi_del(&bp->napi);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -408,6 +408,9 @@ struct b44 {
struct mii_bus *mii_bus;
int old_link;
struct mii_if_info mii_if;
+
+ /* platform device for associated switch */
+ struct platform_device *adm_switch;
};
#endif /* _B44_H */